USER GUIDE

CROMA is an ecological paint developed by MC Pinturas based on air lime, marble dust, selected clays and 100% natural ingredients. Very natural colours are achieved based on pigments that provide a very deep finish, very subtle colour nuances and good ageing over time.

It's easy to get started

Croma can be used directly on surfaces painted with matt or semi-matt water-based paint, as well as on unpainted surfaces. All you need is

  1. CROMA powder (see our colours)
  2. A good quality brush
  3. A small glass to calculate the volumes
  4. A jug for the water
  5. A stirring stick
  6. Gloves
  7. A container to mix in

1. Add Water

Just fill the jug with cold water.

2. Mix

Add the water to the CROMA paint powder gradually, stirring until it is completely dissolved and let the mixture stand for ten minutes.

3. Brush

Use a good quality brush.

4. How to paint

Paint each wall in a single stroke to prevent joints from showing and edges from drying out. Start at the top corner of the wall, painting towards the floor, covering an area of approximately 50-70 cm at a time.

5. X strokes

For a moving effect, paint with X strokes from top to bottom and from left to right.

6. Vertical movement

For a vertical movement, paint with vertical movements (up and down).

7. Transparent finish

To obtain a transparent finish, mix 1 volume of Croma powder paint with 3 volumes of water. You will be able to cover up to 10 square metres of wall.

8. Coating finish

To obtain a covering finish, mix 1 volume of Croma powder paint with 2 volumes of water. You will be able to cover up to 10 square metres of wall.

9. Cleaning

And when finished, the brushes are easy to clean with water.

10. Storage

Unused CROMA paint powder can be stored for years.

Shopping Cart